- KNX Function
- Broadcast DALI
- Laying
- Recessed
DU 1 DALI KNX
The DALI actuator has an integrated power supply, meaning that no additional power supply units—such as a DALI PS—can be connected to the gateway.
The DALI actuator sends broadcast telegrams, acting as a DALI master.
Broadcast telegrams are received by all DALI devices simultaneously, allowing them to be activated all at once.
Unlike 1–10 V technology, a DALI-controllable power supply unit (electronic ballast/driver) is equipped with an electronic switch.
Consequently, there is no need for a separate relay to switch the electronic unit, nor is it necessary to calculate the switching capacity.
The electronic switch also ensures silent operation.
Specifications:
- DALI actuator with 1 DALI output
- Parallel connection of DALI devices to the output
- Channel-based communication via broadcast commands
- No individual or group control of DALI devices
- Provides DALI voltage for the output
- Switching
- Soft switching
- Dimming (relative, absolute, dimming curve, dimming range, etc.)
- Color control (RGB, RGBW, color temperature)
- Participation in central functions
- Scenes (8 scene memories)
- Locking function
- Forced operation function
- Operating hours and maintenance counter
- Diagnostic messages
- Parameterization and commissioning via ETS
- Supports KNX Data Secure
- Power supply via mains connection
- DU_1_DALI_Manuale_it 1.09 MB Only for logged users
- DU_1_DALI_Handbook_en 1.08 MB Only for logged users


